e-Fusion (Ready-to-Use)
e-Fusion RTU (Ready-to-Use) is a professional polymeric sealer. This sealer was made to prevent mold and mildew growth on wooden surfaces. To use e-Fusion, no mixing or stirring is required, and after application, E-Fusion will dry quickly. e-Fusion is designed to be non-corrosive.
e-Fusion comes as a concentrate that can be diluted up to 1:100 with water and is fast-drying.
Features of e-Fusion RTU:
-Non-corrosive
-Fast drying
-Can dilute up to 1 to 100 with water
-No stirring, agitation required
-Prevents short-term protection against mold-mildew growth (up to 3 months)
e-Fusion can be used on surfaces like...
-Framing lumber/trusses
-Millwork
-Pallets
Precautions:
-Two year shelf life
-Do not store in temperatures less than 45° F
-Caution: Eye irritant. If irritation occurs, flush eyes with water for 15 minutes. If irritation continues, seek medical attention.
-Caution: May be harmful if swallowed. If ingested, take 1-2 glasses of water and seek prompt medical attention
For larger quantities (55gal. and 275 gal.) call for pricing and ordering!
e-Fusion RTU (Ready-to-Use) is a professional polymeric sealer. This sealer was made to prevent mold and mildew growth on wooden surfaces. To use e-Fusion, no mixing or stirring is required, and after application, E-Fusion will dry quickly. e-Fusion is designed to be non-corrosive.
e-Fusion comes as a concentrate that can be diluted up to 1:100 with water and is fast-drying.
Features of e-Fusion RTU:
-Non-corrosive
-Fast drying
-Can dilute up to 1 to 100 with water
-No stirring, agitation required
-Prevents short-term protection against mold-mildew growth (up to 3 months)
e-Fusion can be used on surfaces like...
-Framing lumber/trusses
-Millwork
-Pallets
Precautions:
-Two year shelf life
-Do not store in temperatures less than 45° F
-Caution: Eye irritant. If irritation occurs, flush eyes with water for 15 minutes. If irritation continues, seek medical attention.
-Caution: May be harmful if swallowed. If ingested, take 1-2 glasses of water and seek prompt medical attention
For larger quantities (55gal. and 275 gal.) call for pricing and ordering!
e-Fusion RTU (Ready-to-Use) is a professional polymeric sealer. This sealer was made to prevent mold and mildew growth on wooden surfaces. To use e-Fusion, no mixing or stirring is required, and after application, E-Fusion will dry quickly. e-Fusion is designed to be non-corrosive.
e-Fusion comes as a concentrate that can be diluted up to 1:100 with water and is fast-drying.
Features of e-Fusion RTU:
-Non-corrosive
-Fast drying
-Can dilute up to 1 to 100 with water
-No stirring, agitation required
-Prevents short-term protection against mold-mildew growth (up to 3 months)
e-Fusion can be used on surfaces like...
-Framing lumber/trusses
-Millwork
-Pallets
Precautions:
-Two year shelf life
-Do not store in temperatures less than 45° F
-Caution: Eye irritant. If irritation occurs, flush eyes with water for 15 minutes. If irritation continues, seek medical attention.
-Caution: May be harmful if swallowed. If ingested, take 1-2 glasses of water and seek prompt medical attention
For larger quantities (55gal. and 275 gal.) call for pricing and ordering!
How to Use e-Fusion:
-Surfaces must be free of sawdust, dirt, oil, grease, paints or anything that would prevent direct application of e-Fusion. We recommend using GreenOx Renew for maximum surface penetration and cleaning.
For New Home Construction:
For builders treating houses under construction, the best time to apply e-Fusion is just after the dried-in stage and before installation of windows, doors and mechanics.
Electro-Static Spray Method
-Dilute 1 part e-Fusion with 4 parts water
-After the surface is clean, brush or spray E-Fusion RTU on the surface. Apply only to the point of run-off
-Low pressure equipment (max of 165 PSI) is recommended for spray applications. A moderately fine spray, not an aerosol or fog, provides the best coverage
Pallet Spray Method:
-For power spray systems, dilute e-Fusion 1:25 with water
-Spray e-Fusion on the surface only to the point of run-off
-Low pressure equipment (max of 165 PSI) is recommended for spray applications. A moderately fine spray, not an aerosol or fog, provides the best coverage
Dip Method:
-For dip tank or power spray systems, dilute e-Fusion 1:50 with water. Use a tank that will fit the size of the wood you are treating
-Stack the wood to be treated on a suitable harness or platform and convey the stack into the treating solution. Mke sure the stack is completely immersed.
-Dip times range from 30 seconds (individual pieces) to up to 30 minutes (bundled wooden articles)